"As an Amazon Associate, I earn from qualifying purchases. I only recommend products that we have tried!"

Are you looking for a car that stands out from the crowd? Or perhaps you’d like to protect your new wheels during the harsh winter months. So here’s something that may blow your mind. Most automotive lovers wish to change the appearance of their vehicles. But they don’t want to compromise on the paint quality. In this regard, the only paint you really need to buy without spending an outrageous amount is Plasti Dip.

Plasti Dip is more appealing than other paints because of its ease of use. You can use a paint sprayer or paint spray can to apply the paint on any surface. However, a question that comes to mind is how long does plasti dip last?

coats of plasti dip on rims and wheel

What is Plasti Dip Exactly?

Plasti Dip‘ is a PVC-based coating that provides the appearance of a rubber-like covering on your car. After a few minutes, the Plasti Dip sprayable rubber solidifies into a rubber compound that is easily peelable and leaves no trace when applied correctly.

You can change your car’s color, personalize it, or even paint the rims of your tires with Plasti Dip. The Plasti Dip is available in multiple colors.

How Long Will Plasti Dip Last?

how long does plasti dip take to dry

It is possible for Plasti Dip to last as long as three years without the need for touch-ups.

The product is durable, and yet the plasti dip come off easily as you can see in this picture.

There is another factor to consider when it comes to the number of sprays that are applied during the plasti dip process. Spraying two coats of spray paint will last longer than spraying one coat of spray paint.

There is no better way to switch colors, and even you won’t find a cheaper way to freshen up the look of your car.

How Do You Apply Plasti Dip?

  • The most important step before spraying is preparing the surface.
  • You should always clean the area well before applying the paint. Next, covering something that’s been damaged, such as a curbed wheel or a keyed body panel, may require sanding.
  • Make sure to mask the surrounding surfaces as well.
  • You can peel off any excess dip, but masking the surrounding areas is much easier than peeling off a partially coated area that was mistakenly applied.
  • You can mix multiple colors of Plasti Dip and then spray with any spray gun compatible with Plasti Dip.
  • If you want Plasti Dip to last for three long years, you will need to pay attention to the way you use the spray can or spray gun, and the number of coats that you apply.
  • Spraying equipment should be held at a certain distance to ensure that you cover a sufficient area without spilling too much paint.
  • You should spray lighter coats at first and then increase the spray intensity with each successive coat. If you apply it too thickly, you may get streaks.

People often ask, how long to wait between coats of plasti dip?

  • A number of factors affect the time between coats, such as humidity and temperature. However, you can allow this product to dry for about half an hour or until it looks dry.
  • Follow this process for four to six times because spraying more coats will make removing the product material easier.

So, now that we know how long Plasti Dip lasts, another question appears, Is Plasti dip durable?

Plasti Dip is a durable material that can withstand natural elements such as temperatures of -30 °F to 200 °F. So, don’t worry about fiery-red flames erupting from your car’s hood. Plasti Dip is often used on car wheels or rims because of its ability to withstand harsh temperatures

plasti dip vs rustoleum comparison


I recently tackled a DIY project at home involving my carriage lights. I coated the panes with Plasti-Dip, and the results are fantastic, you can see that!

coated the panes with Plasti-Dip

If, for any reason, the new look isn’t your thing, no worries – the dried plasti dip coating can be peeled off easily. But if you love it as much as I do.

Not only do you get a stylish update, but you’re also helping in the fight against light pollution and preserving our beautiful night sky.

How Long Does Plasti Dip Last on Rims and wheel?

plasti dip last on rims and wheels

Wheels and rims are undoubtedly more expensive parts of your car that experience the most friction. In addition, your car’s rims and wheels are constantly exposed to everything from mud, salt to the ice.

Plasti Dip has the ability to resist temperatures up to 200°F, so your car tires have a greater chance of resisting heat rising from friction. Therefore, if plasti dip coating applied correctly, the wheels and rims may last for up to two years longer.

How long does plasti dip take to dry before driving?

The plasti dip dry time is around 30 minutes between coats and it takes about 4 to 6 hours to cure. This may change depending on the ambient conditions.

Plasti dip car, how long does it last?

A fresh application of Plasti Dip can generally last for three years when applied to a car with good maintenance. However, there are a few factors that will determine how long your plasti dip lasts, such as the temperature and UV levels in your country, which can influence how quickly it burns on your plasti dip car.

A study on the factors that determine plasti dip longevity

Spray guns or brushes can be used to apply Plasti Dip, depending on your project. However, plasti dip spray guns are designed for spraying plasti dip material over large areas quickly. To choose the right Plasti Dip Spray Gun, you have to consider the factors affecting it. These factors include:

Surface Cleaning

It’s important to clean any grease or dirt off the surface you’re planning to spray to ensure good adhesion. You can apply Plasti Dip in multiple coats over alcohol or acetone.

Next, patch up minor scratches and cracks before applying Plasti Dip and If a scratch is deep enough, you may want to use body filler first.


A warm sunny day is ideal for this job. As a water-based product, Plasti Dip has a tendency to react with humidity and temperature; this means that if there’s a lot of moisture in the air, the drying time will be longer, and if the temperature falls below 40 degrees, the application will be difficult.


You may need to apply Plasti Dip coating multiple times but don’t make the mistake of trying to do everything in one shot. It’s best to wait 30 minutes between coats, depending on how much you’re covering.

How many coats of Plasti Dip should I apply?

You are allowed to apply as many coats of Plasti Dip protective coating as you wish for best results.

  • Recommended 5 coats for wheels and rims (whole car).
  • At least 2-3 coats for EVA foam.

A thin coat dries faster and has fewer bubbles than a thick one. So, for the best results, lay down your coats vertically, rather than horizontally.

Spray gun selection

It is important to do your research before buying a spray gun, since different guns have different characteristics. Some paint guns are more likely to clog. On the other hand, some guns spray finer coats than others. Besides Amazon, you can also find spray guns and other plasti dip products here.

An adjustable fan-pattern is also useful for adjusting the width of your coatings. In addition, Plasti Dip spray painting has many other factors that determine the successful result.

Longevity of plasti dip color coat

Most people tend to use clear Plasti Dip over black surfaces because black fades quickly in the sun. A single coating of Plasti Dip is sufficient for most applications, but it can be applied several times to ensure a flawless finish. You should always research the best solution for your particular application.

Plasti dip’s drying time

Most Plasti Dips require at least an hour or two to completely dry. As your coats get thicker, the drying time may increase significantly.

One trick for quick drying is to use a low heat hairdryer. It works by evaporating a few of the solvents in recol dip so that it can dry more rapidly.

Conclusion on How Long Does Plasti Dip Last:

When it comes to how long Plasti Dip lasts, it all depends on the quality of the application and the number of layers. Plasti Dip has the advantage of working differently on various surfaces and not being permanent.

Putting it simply, Plasti Dip is a three-year product that will last a long time and give you a good return on investment.

FAQs On How Long Does Plasti Dip Last:

How long does Plasti Dip last on emblems?

Each emblem requires four to five light coats. You should apply one coat at a time and then allow it to dry for fifteen minutes. You must apply Plasti Dip correctly in the first place to ensure the product lasts for at least three years, without having to retouch it.

How long does Plasti dip last once opened?

Plastic dip usually lasts for nine months, but you will need to apply it repeatedly to high-wear areas, such as the wheels of your car. In addition, Plasti Dip products should be stored in a cool, dry environment.

How should Plasti Dip be cleaned?

You can actually wash dipped components like washing a car. But, make sure not to use Plast Dip with any harsh chemicals or solvents, such as gasoline. You just need to rub the area with soapy water to clean. Alternatively, you can try window cleaner as well.

Flex seal vs Plasti dip – How do they differ?

Rubber compound Flex Seal is sprayable, but its main purpose is to prevent leaks, not to appeal to the eye. If you would like to paint your car a different color, Plasti Dip is a better option.

HyperDip vs Plasti Dip: Which is better?

Hyper Dip is peelable, just like Plasti Dip. It is a new technique for peelable aerosol paint. In addition, hyper dip is much better for your trim, emblems, mirrors, wheels, or any other small area.

Is it Possible to Plasti Dip during Cold Weather?

You can, but you should probably warm the cans up if the temperature is below 60°F (15.5°C). Spraying dip in cold temperatures will likely result in uneven coverage. In addition, you have to give it some extra time to dry in cold weather.

Do You Paint Over Plasti Dip?

You can, but you should first apply a nice, thick coating of Plasti Dip before you begin painting. If you paint over Plasti Dip, it may limit the dip’s ability to stretch, therefore making it harder to peel off.

How much does it cost to dip rims?

The price of plastic dip varies according to the brand and quality. You’ll usually need one can per wheel, so the cost varies between $22 and $88 depending on the dip you use.

When should I replace Plasti Dip?

When you notice a layer of paint peeling off, it is time to recoat. Re-spray all parts to keep your car looking new. Furthermore, you can also apply plasti dip on your rims to keep them clean.

Does Plasti Dip ruin car paint?

It leaves no residue and will not damage the original paint of your car. It is important for the painter to apply multiple coats of dip to make the process of removing it as easy as possible.

Can you make Plasti Dip permanent?

No. The Plastidip is designed to peel off, so how you use it doesn’t matter. To put it another way, the more coats you apply, the greater the durability.

Jennifer Marie-Holapaints writer

Jennifer Marie

Jennifer Marie is a general contractor with over the years of experience in home remodeling, DIY projects, and commercial painting projects. Her experience includes working with paint sprayers, painting tools, and other painting supplies. You can follow her on Facebook.

Similar Posts